Education & Events

Length: Approx 50 minutes

The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This is a follow on from Module 1 and you need to have attended or viewed the first module prior to attending this module. We will be building on what was covered in the first module, looking at more advanced programming options.

The session will include time for Q & A and we will send you a complete pdf of the module after the session.

Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Length: Approx 30 minutes

This module focuses on setting up the i-drive Head Array and takes you through the various steps involved in setting this up on a powerchair equipped with Q-Logic 3. You will learn how to install i-drive, to connect i-Drive to Q-Logic 3, how to adjust the settings in Q-Logic 3 using Econ-W and how to make fine adjustments to the head array to suit the client’s needs.

The session will include time for Q & A and we will send you a complete pdf of the module after the session.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Length: Approx 1 hour

The Basic Programming component of this module covers the basics of powerchair programming, what you are trying to achieve and how to go about it. We will cover the VR2, Dynamic Shark and Q-Logic 2 controllers. 

The AML ABC's component of the module will cover a wide variety of topics around working with Allied Medical and our products. We look at warranties, post-sale support, servicing options and go through how to use the Technical Resource Bank on our website.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 45 minutes

In this module we will be covering a breakdown of the parts that are in the growth kit, and the process to go through to grow the chair. Also covered will be things to check when the growth is completed and the benefits of checking these after doing any adjustments on a chair. The team at Ki Mobility have put together some video’s especially for this presentation.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 30 minutes

This module focuses on setting up the i-drive Head Array and takes you through the various steps involved in setting this up on a powerchair equipped with Q-Logic 3. You will learn how to install i-drive, to connect i-Drive to Q-Logic 3, how to adjust the settings in Q-Logic 3 using Econ-W and how to make fine adjustments to the head array to suit the client’s needs.

The session will include time for Q & A and we will send you a complete pdf of the module after the session.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Length: Approx 40 minutes

This module follows on from the earlier Introduction to Alternative Drive Controls module. This module includes how to set up switch driving to allow clients another way to drive when other options are no longer suitable.

Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 1 hour

This session looks at the Karma Flexx basics and configuration of the complex Karma Flexx. Our team will cover topics such as how to adjust the seating, axle plate positioning, setting up anti-tippers, changing back canes and much more.

This session will also include a new module on Adjusting the Ki Mobility Rogue Manual Wheelchair. Our team will cover topics such as changing the centre of gravity, wheel camber, rear seat to floor height and seat to footrest heights. We will cover how much adjustment there is to change the front seat height, adjusting the seat depth and back cane height. We will also discuss the new style backrest Ki Mobility have rolled out, the differences this has from the old style that it replaces, and how to adjust both.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 35 minutes

This session will offer a complete overview of Interactive Assist, the diagnostic app from Quantum Rehab that provides a direct, real-time connection from a powerchair’s electronics to a provider’s programming station. The session will cover what can be resolved remotely, how to use the app on both android and iPhones and connecting through ECON-W. 

Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 35 minutes

This module covers how you can get the most of the Quantum Rehab TRU-Balance® 3 seating systems by understanding how to adjust seat width, seat depth and correctly configure the centre of gravity. We will also cover the basic features and components of the REAC Lift and Tilt seat base system.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz

Length: Approx 50 minutes

The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This first session will focus on basic programming and how to utilise standard functions. 

The session will include time for Q & A and we will send you a complete pdf of the module after the session.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Length: Approx 50 minutes

The Q-Logic 3 modules will be spread over multiple sessions and will cover programming for powerchairs with Q-Logic 3, customising powerchairs to help clients get the most out of their device, using the ECON Eco System and troubleshooting as well as providing an in-depth product overview. This is a follow on from Module 1 and you need to have attended or viewed the first module prior to attending this module. We will be building on what was covered in the first module, looking at more advanced programming options.

The session will include time for Q & A and we will send you a complete pdf of the module after the session.

Please note: AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Length: Approx 30 minutes

This module contains a break down of the steps our Technicians take when setting up a clients powerchair. This covers all aspects of the set-up from the seat depth, armrest and foot plate heights, and controller placement.

Please note AML Certified Modules are for Wheelchair Technicians and Subcontractors only.

Recording available on request. Please email marketing@alliedmedical.co.nz